User manual

22
into setting interface.
PORT: the port for mobile view, you should open the port in the router for mobile view. Please note
that the server port of DVR must with the same port of mobile .
Network: Select different mobile network from the options of WIFI, 2.5G, 2.7G,3G and WIFI, and
press [Enter] to switch different network.
2.2.3.5 MOTION DETECT
Move the cursor to【MOTION】（Icon with the orange box means that selected）,press【Enter】to enter
into setting interface.
CH01~CH04:click to pop up pull-down box to switch to other channel to carry out setting.
STATUS: Each channel has corresponding channel switch, press 【Enter】to turn on or turn off the motion
detection for each channel..
SENSITIVITY:Each channel has corresponding sensitivity setting, including four standards
highest,high,middle and low, press【Enter】key to switch
MD AREA: each channel has corresponding regional motion detecting setting, move the cursor to
corresponding 【setting】,press【Enter】to enter regional setting interface, red area means it have activated
motion detection, transparent block means it have not activated motion detection.