User manual

16
via click the corresponding period.
PLAY: You can press 【Enter】 input number directly to setup playback time. After setting, move the
cursor to “PLAYBACK”, and then press”APLLY”to enter into video playback of that time. Also you can
select any period of time in the video status frame after searching,press”APLLY”to enter into the video
playback of this period.
DETAIL FILES: Enter into the video file list interface of the selected date.
LOG SEARCH: Enter into the log searching interface.
2.2.2.5 DETAIL FILES
Setup the searching date, after pressing “SEARCH”,move the cursor to “Detail files” and press”APPLY”to
enter into the video file list of this date.
Then you can select four channels as you want to playback.
Instruction:
1. 【DETAIL FILES】,“CHANNEL”is the recording file which belong to which channel, “SIZE” is
display the size of this file（Unit:MB）, “TYPE” is display the type of recording file, there are two types:
normal and alarm,press“BACKUP”button can export the selected files to USB storage;
2. After moving the cursor up and down and select the files, and press【APPLY】to enter into playback
interface. If the all channels have recording files, it will be playback all windows at the same time.
3. If setup as “Open” in the【RECORD TIME】in 【DISPLAY】, it will show the date/time when
playback record file; If setup as “Close”it will not display time.
4. When playback, can press【 】to play slowly; press【 】and【 】to speed、reverse play; also