Owner`s manual

8
5-5/16"
135mm
WK-4
Bottom View
2-9/16"
65mm
WK-4
Side View
1-1/2"
38mm
1-5/8"
41mm
WK-4
Mounting
Cutout Detail
The WK-4 can be custom installed in a
wall opening, piece of furniture or cabinet
of your choice. The WK-4 will fit in a
standard NEMA, 3-gang, sheet-steel or
non-metallic outlet box with a depth of 2-
1/2 inches. The WK-4 can be mounted di-
rectly to a wood or plasterboard wall by
making a cutout according to the dimen-
sions shown below. Plastic screw anchors
are supplied for installation in plaster-
board. Make sure the mounting surface is
flat so the keypad does not bend or deform
when the screws are tightened. Do not in-
stall the WK-4 directly above a heat gener-
ating object such as a radiator.
Note: Allow for an additional 1/8 of an inch
(3.2mm) in depth behind the Terminal
Connector for wires.
WK-4 Dimension and Installation
WK-4 Dimension and Installation