Owner`s manual

7
WK-3 Dimension and Installation
WK-3 Dimension and Installation
WK-3
Mounting
Cutout Detail
The WK-3 can be custom installed in a
wall opening, piece of furniture or cabinet
of your choice. The WK-3 will fit in a
standard NEMA, 1-gang, sheet-steel or
non-metallic outlet box with a depth of 2-
1/2 inches. The WK-3 can be mounted di-
rectly to a wood or plasterboard wall by
making a cutout according to the dimen-
sions shown below. Plastic screw anchors
are supplied for installation in plaster-
board. Make sure the mounting surface is
flat so the keypad does not bend or deform
as the screws are tightened. Do not install
the WK-3 directly above a heat generating
object such as a radiator.
Note: Allow for an additional 1/8 of an inch
(3.2mm) in depth behind the Terminal
Connector for wires.
1-11/16"
43mm
WK-3
Bottom View
2-9/16"
65mm
WK-3
Side View
1-1/2"
38mm
1-5/8"
41mm