Owner`s manual

7
WK-4 Installation
WK-4 Installation
WK-4
Top View
WK-4
Side View
WK-4
Mounting
Cutout Detail
The WK-4 can be custom installed in a
wall opening, piece of furniture or cabinet
of your choice. The WK-4 will fit in a
standard NEMA, 3-gang, sheet-steel or
non-metallic outlet box with a depth of 2-
1/2 inches. The WK-4 can be mounted di-
rectly to a wood or plasterboard wall by
making a cutout according to the dimen-
sions shown below. Plastic screw anchors
are supplied for installation in plaster-
board. Make sure the mounting surface is
flat so the keypad does not bend or deform
when the screws are tightened. Do not in-
stall the WK-4 directly above a heat gener-
ating object such as a radiator.