Owner`s manual

3
Thank You.............................................. 2
Please Take a Moment ........................... 2
Customer Service................................... 2
Table of Contents ................................... 3
Safety Instructions ................................. 3
Introduction ........................................... 5
Performance Features ............................ 5
WK-3 Installation .................................. 6
WK-4 Installation .................................. 7
How to Connect the WK-3 Keypad....... 8
How to Connect the WK-4 Keypad....... 9
WK-3 Front Panel Push-Buttons ......... 10
WK-4 Front Panel Display
and Push-Buttons ................................. 11
How to Operate the WK-3 and WK-4 . 12
Specifications ...................................... 15
Packing Instruction .............................. 15
NOTES:
1. As soon as a WK-4 installation is complete
and the system power is turned on,
momentarily press the RESET push-button
to clear the microprocessors before further
setup is attempted.
2. For additional connection information,
refer to the owners manual(s) for any
component(s) connected to the WK-3 /
WK-4 Keypads.
3. Up to four sensors or keypads can be
wired in parallel for a single zone.
4. If AC power is interrupted to the WK-4
system, all clock and timed functions will
be retained for approximately 1 hour.
Table of Contents
Table of Contents and
Safety Instructions
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM BEFORE
OPERATING THIS
EQUIPMENT.
WARNING SHOCK
HAZARD - DO NOT OPEN.
AVIS RISQUE DE CHOC -
NE PAS OUVRIR.
NO USER-SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
PERSONNEL
General:
1. Read all the safety and operating in-
structions, contained in this owners
manual, before operating this equip-
ment.
2. Retain this owners manual for future
reference about safety and operating
instructions.
3. Adhere to all warnings and operating
instructions.
4. Follow all operating and use instruc-
tions.
5. Warning: To reduce risk of fire or
electrical shock, do not expose this
equipment to rain or moisture. This
unit is capable of producing high
sound pressure levels. Continued ex-