Owner`s manual

13
How to Operate the
WK4 cont
track) or play to operate a CD player,
Video Disc player or tape recorder. Press
Acc On push-button to turn AC power of
a McIntosh MLD720 Video Disc player
on and off.
Disc and Track
The Disc (AM) and Track (FM) push-but-
tons can be programmed to perform trans-
port operations when a component is con-
nected using the RCT-3 emote Control
Translator.
Reset Push-Button
The RESET push-button performs the fol-
lowing.
1. Press and hold for 3 seconds or more
to reset ALL CLOCK functions to
zero.
2. Press momentarily to reset the WK-4
microprocessors in case of lockup.
NOTE: The above condition is usually
caused by either
interruptions in
AC power and/or
major changes in
voltage.
Alternate Push-Button
Functions
Certain WK-4 push-
buttons perform alter-
nate functions when
used with a McIntosh
MCD7009 CD player
WK-4
Figure 2
Figure 3
WK-4 Push Button MCD7009 Function MLD7020 Function
Channel
Fast Forward Fast Forward
Channel
Reverse Reverse
AM - Side A
FM - Side B
Acc On - -
Enter Pause Pause
Review - +10
and the MLD7020 Video Disc player. Re-
fer to Figure 3.
How To Set the Keypad Clock Time
1. Press and Hold the Clock push-button
for the entire time setting procedure.
2. Press and Hold the Hours push-button
until the display indicates the correct
AM or PM hour.
Note: The cycling speed of the hours and
minutes during any time setting will
increase after holding a push-button
down for 3 seconds.