OWNERS MANUAL WK-3 / WK-4 KeyPads WK-3 WK-4 McIntosh Laboratory, Inc.
Thank You, Please Take A Moment, and Customer Service Thank You Customer Service For your decision to own this McIntosh WK-3 / WK-4 Keypad ranks you at the very top among discriminating music listeners. You now have The Best. The McIntosh dedication to Quality, is assurance that you will receive many years of musical enjoyment from this unit. Please take a short time to read the information in this manual.
Table of Contents and Safety Instructions Table of Contents Thank You.............................................. 2 Please Take a Moment ........................... 2 Customer Service ................................... 2 Table of Contents ................................... 3 Safety Instructions ................................. 3 Introduction ........................................... 5 Performance Features ............................ 5 WK-3 Installation ..................................
Safety Instructions, cont posure to high sound pressure levels can cause permanent hearing impairment or loss. User caution is advised and ear protection is recommended when playing at high volumes. 6. Do not use attachments not recommended in this owners manual as they may cause hazards. Installation: 7. Locate the equipment away from heat sources such as radiators, heat registers, stoves, or other appliance (including amplifiers) that produce heat. 8.
Introduction and Performance Features stitutions may result in fire, electric shock, or other hazards. 16. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Introduction The McIntosh WK-3 and WK-4 keypads allow convenient push-button remote control of McIntosh Control Centers or Multizone Control Systems.
WK-3 Installation WK-3 Installation The WK-3 can be custom installed in a wall opening, piece of furniture or cabinet of your choice. The WK-3 will fit in a standard NEMA, 1-gang, sheet-steel or non-metallic outlet box with a depth of 21/2 inches. The WK-3 can be mounted directly to a wood or plasterboard wall by making a cutout according to the dimensions shown below. Plastic screw anchors are supplied for installation in plasterboard.
WK-4 Installation WK-4 Installation The WK-4 can be custom installed in a wall opening, piece of furniture or cabinet of your choice. The WK-4 will fit in a standard NEMA, 3-gang, sheet-steel or non-metallic outlet box with a depth of 21/2 inches. The WK-4 can be mounted directly to a wood or plasterboard wall by making a cutout according to the dimensions shown below. Plastic screw anchors are supplied for installation in plasterboard.
How to Connect the WK-3 to the CR12 and MX130 How to Connect the WK-3 to the CR12 How to Connect the WK-3 to the MX130 1. Connect one end of a shielded 4 conductor cable from the keypad connector to the CR12 terminal connector, according to the Pin Numbers listed below. 1. Connect one end of a shielded 4 conductor cable from the keypad connector to the MX130 terminal connector, according to the Pin Numbers listed below.
How to Connect the WK-4 to the CR12 and MX130 How to Connect the WK-4 to the CR12 How to Connect the WK-4 to the MX130 1. Connect one end of a shielded 4 conductor cable from the keypad connector to the CR12 terminal connector, according to the Pin Numbers listed below. 1. Connect one end of a shielded 4 conductor cable from the keypad connector to the MX130 terminal connector, according to the Pin Numbers listed below.
WK-3 Front Panel Push-Buttons WK-3 Front Panel Push-Buttons IR sensor Select any of five signal sources Turns entire system off Turns the zone you are in on or off 10 Perform operating function on a Tuner, CD player or Laser Disc Player Adjusts volume up or down in the zone you are in
WK-4 Front Panel Display and Push-Buttons WK-4 Front Panel Display and Push-Buttons Indicates a timed event Indicates that the has been programmed sleep mode is active and the timer is on Indicates the Sets Hours, Indicates the time of day, Minutes for ON or OFF of sleep mode or clock and a timed event a timed event timed events Select any of eight signal sources IR sensor Activates the Sleep Mode Select CD or Laser Video Disc player functions, tape recorder functions or tuner preset review Activates
How to Operate the WK-3 and WK4 How to Operate the WK-3 and WK4 Input Push-buttons Press to turn on a local zone and select a desired signal source. The selected source push-button will illuminate. IR Sensor Aim a Remote Control toward the built-in sensor to perform operating functions. WK-3 Note: Refer to figure 1 for the WK-3 and figure 2 for the Wk-4. Transport Operations Press Play. Stop or Next (next track)/Rev to operate a CD player Video disc player or tape recorder.
How to Operate the WK4 cont track) or play to operate a CD player, Video Disc player or tape recorder. Press Acc On push-button to turn AC power of a McIntosh MLD720 Video Disc player on and off. Disc and Track The Disc (AM) and Track (FM) push-buttons can be programmed to perform transport operations when a component is connected using the RCT-3 emote Control Translator. Reset Push-Button The RESET push-button performs the following. 1.
How to Operate the WK4 cont 4. Press and Hold the Minutes push-button until the display indicates the correct minute. 5. Release the Clock push-button. The time is set and the clock will be running. Note: If you wish to cancel the clock setting and start over, press RESET and hold for 3 seconds or more. How To Set Sleep Time Sleep times can be set from a maximum of one hour, to a minimum of 10 minutes, in 10 minute intervals. 1. Press the Sleep push-button once.
Specifications and Packing Instructions WK-3 Specifications WK-4 Specifications Power Requirements 12 Volts, D.C. @50mA Power Requirements 12 Volts, D.C. @50mA Dimensions 1-1/2 inches (38 mm) Wide, 2-9/16 inches (65 mm) High, 1-5/8 inches (41 mm) Depth, allow an additional 1/8 inches (3.2 mm) for wires Dimensions 5-5/16 inches (135 mm) Wide, 2-9/16 inches (65 mm) High, 1-5/8 inches (41 mm) Depth, allow an additional 1/8 inches (3.2 mm) for wires Weight 0.5 pound (0.23 Kg) net, 1 pounds (0.
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 McIntosh Part No.
