Owner's Manual

14
UPDATE Menu
The UPDATE menu allows you to reset settings to
the factory defaults as well as update your RS250.
To restore Factory settings, select the “Start
Factory Reset” button. Done. Note that you will
lose your Wi-Fi and Bluetooth connection settings.
An alternative method for Factory Reset, is to Press
and Hold the Left and Right Knobs for 10 seconds.
Update Method allows you to set how the RS250
updates its rmware. When set to the default of OTA
Auto, the RS250 will periodically check for updates
and install them automatically. When set to OTA
Manual, the RS250 will check for available updates
when you select the Start Search button to the right
of Check for Update. If an update is available, you
can install it by selecting Start Update. (OTA stands
for “over-the-air”.)
The Service option for updating is for service
purposes by a McIntosh qualied technician only.
While the RS250 is in the process of updating the
rmware, the power status LED will blink twice
in quick succession, pause for 2 seconds, and then
repeat during the entire process. Other internal
processor updating will be accompanied by other
LEDs or indicator ashing. This is normal.
Figure 13– UPDATE submenu