Owner's Manual

13
Figure 11– OVERVIEW Submenu
Select Network Type to see/change settings:
• Automatic
• Wired
• Wireless
If Network Type is set to Automatic, the RS250 will
automatically connect to Wi-Fi when the ethernet
cable is unplugged provided the Wireless connection
has previously been setup. Selecting Wired for
Network Type will limit the RS250 network
connection to the ethernet port connection. Select
Wireless to setup a Wi-Fi network or to restrict the
network connection to Wi-Fi.
If you selected the Network Type of Wireless, the
following submenus appear:
• Scan Networks
• Display SSID
• Network Password
To set up a wireless connection for the RS250:
• Select Start Scan
• In the Display SSID submenu, select a
wireless network using the up/down arrows
• Enter the Network Password for that Network
• Select Connect
DHCP can be set to ON (Default) or OFF. If you
change this setting to OFF, you will need to provide
the following information manually:
• IP
• Netmask
• Gateway
• DNS (1st and 2nd)
With DHCP ON, this information is automatically
acquired and the submenus to enter the information
are not visible.
Figure 12– SETTINGS Submenu
2
2