Owner's Manual

11
Network/Wi-Fi Indicator LED
When connected to a network, the Network/Wi-
Fi indicator LED will be glow a solid green. For
network states, see the table below:
LED Status
Green- slow
pulse
RS250 is in process of joining
the network
Green- solid Connected to the network
Red- solid a network error has occurred
Red- slow
pulsing
there is a critical rmware issue.
Please upgrade rmware
Input Select
Use the Input Select Knob to select any wired
input. Wireless Input selection is automatic. There
is a hierarchy of input types. A Wi-Fi connection
will take precedence over a Bluetooth connection.
If there is no Wi-Fi connection present, Bluetooth
connection is automatic.
If a Bluetooth connection is interrupted then it must
be re-established from the mobile device.
Sleep Mode LED
The LED will glow red when the RS250 is
connected to a live AC outlet and the unit is in
Sleep Mode. When the RS250 receives a power on
command, the Sleep Mode LED will turn o.
Input Indicators
When a network streaming session is active, the
NET light will be lit. When a Bluetooth connection
is established, the BT LED will be solidly lit.
The BT ashing indicates that the RS250 is in
Bluetooth discovery mode. Other inputs will
illuminate when selected.
Rear Connecons
Rear Panel Views
Figure 10– Rear View
Ethernet Port
The Ethernet Port connects your RS250 to your
network’s router using a standard CAT5, CAT5E
or CAT6 cable with an RJ45 connector. Using a
wired connection is one way to access the RS250’s
setup via a browser. For more information, see
“The Browser Interface” on page 12.
AC Connector
Use the supplied AC Power Cord to connect
the RS250 to a live AC outlet.
USB Service Port
The USB port is only for performing service
functions by a qualied service technician. It is
not intended for USB device support or playback.
AUX
IN
S E R V IC E
TR IG
OU T
DATA
OU T
S UB
OU T
P HONO
IN
P HONO
G ND
E THE R NE T
OP TIC AL
IN
HDMI AND
OP TIC AL
LE VE L ADJ US T
HDMI IN
(AR C )
C E C
DE FE AT
L R
Contains IC:
Contains FCC ID:
Contains IC:
Contains FCC ID:
Power Switch