Specification Sheet

MAC7200

stereo receiver

www.mcintoshlabs.com

■

With 200 Watts per channel, 14 inputs and a high-

performance AM/FM tuner, the MAC7200 Stereo Receiver

is a music lover’s dream.

■

Built-in AM/FM tuner will pick up your favorite radio stations

with unparalleled clarity and a realism that is free from

noise and distortion.

■

All digital inputs are housed in the DA1 Digital Audio

Module. The DA1 can be replaced by future modules to

easily keep the MAC7200 current with all the latest digital

audio technologies.

■

Supports high resolution digital music up to DSD256 and

DXD 384kHz via an 8-channel, 32-bit/192kHz DAC used in

Quad Balanced mode.

■

Features our new McIntosh Monogrammed Heatsinks

™

that are so efcient at dissipating heat that they warrant

bearing the McIntosh “Mc” logo.

■

Utilizes new, more powerful control microprocessors and

some of the latest audio-grade circuit components.

■

Full of numerous McIntosh technologies including

Autoformers, Power Guard

, Sentry Monitor

™

, Home

Theater PassThru, High Drive headphone amplier with

Headphone Crossfeed Director (HXD

) and Power Control.

A Music Lover’s Dream

PAGE 1
MAC7200 stereo receiver ■■ ■■ ■■ ■■ ■■ ■■ ■■ With 200 Watts per channel, 14 inputs and a highperformance AM/FM tuner, the MAC7200 Stereo Receiver is a music lover’s dream. Built-in AM/FM tuner will pick up your favorite radio stations with unparalleled clarity and a realism that is free from noise and distortion. All digital inputs are housed in the DA1 Digital Audio Module. The DA1 can be replaced by future modules to easily keep the MAC7200 current with all the latest digital audio technologies.
PAGE 2
MAC7200 stereo receiver Power Output: 200 Watts per channel. McIntosh Autoformers ensure all speakers receive the full 200 Watts regardless if they are 2, 4 or 8 Ohm impedance. Total Harmonic Distortion: 0.005% maximum from 20Hz to 20kHz Tone Controls: Bass and Treble Headphone Amplifier: 1/4” High Drive with Headphone Crossfeed Director (HXD®). Powers all headphones from 20 to 600 Ohms.