Specifications

IF YOU'RE IN A
1 Input Selector ... Aux ... for any device con-
nected to the AUX inputs on back. FM MONO
listen to FM mono broadcasts. FM AUTO ...
listen to FM stereo broadcasts. Phono
1 for
phonograph records. Phono 2 for phonograph
records. Tape hd. for a tape playback unit
without preamplifier.
2 Tune for center of black area.
3 Adjust to desired volume. Power off. Turns the
system on/off.
4 Tuning ... select desired station.
5 Treble ... modifies high frequency sounds. Set
to your taste.
6 Bass ... modifies low frequency sounds. Set to
your taste.
7 Headphone ... to connect a set of low imped-
ance stereo headphones.
8 Loud ... use this switch to compensate for low
volume listening and still hear full frequency
range.
9 HF Filter In ... reduces high frequency noise
such as record surface noise.
15 Will light only on stations broadcasting MPX
stereo.
13 Stereo ... Mono ... Set to stereo for all stereo
program material. Mono position for all mono
material.
14 Balance ... to make one speaker louder than
the other. Permits you to adjust for unequal
sound caused by room acoustics or program
material.
10 LF Filter In ... reduces low frequency noise
such as turntable rumble.
11 Muting In eliminates interstation noise.
Muting Out use to receive weak stations.
12 Tape Mon monitor position used to monitor
a recording when used with a tape recorder
with separate playback and record heads.
MUST BE IN OUT POSITION FOR NORMAL
LISTENING.
TREBL(
,,.
O'
flAS~
\I)
II
TAP£ FllT(f($ MUTING lOUD
MON If HF
II
8AlANCE
I