Owner`s manual
8
How to Connect
How to Connect
Right Front Loudspeaker Left Front Loudspeaker
The McIntosh HT-5 Loudspeaker System utilizes binding
posts for speaker wire connections. Refer to figure 3.
1. Connect a loudspeaker cable from the black (negative -)
loudspeaker binding post to the negative or common
output terminal of one channel of the amplifier.
2. Connect a loudspeaker cable from the red (positive Å)
loudspeaker binding post to the positive or 4 ohm out-
put terminal of the same channel of the amplifier.
3. Tighten all of the loudspeaker binding posts.
Center Channel Loudspeaker
Speaker Connections
To Amplifier Terminals
Figure 3
+
-