CR10 REMOTE CONTROL SYSTEM
CR10 REMOTE CONTROL SYSTEM
1. 2. 3. 4. IMPORTANT SAFETY INSTRUCTIONS THESE INSTRUCTIONS ARE TO PROTECT YOU AND THE MclNTOSH INSTRUMENT. BE SURE TO FAMILIARIZE YOURSELF WITH THEM Read all instructions - Read the safety and operating instructions before operating the instrument. Retain Instructions - Retain the safety and operating instructions for future reference. Heed warnings - Adhere to warnings and operating instructions. Follow Instructions - Follow all operating and use instructions.
Your decision to own this piece of Mclntosh Stereo Equipment ranks you at the very top among discriminating music listeners. You now have "The Best". The Mclntosh dedication to "Quality", is assurance that you will receive thousands of hours of musical enjoyment from this unit. Please take a short time to read the information in this manual. We want you to be as familiar as possible with all the features and functions of your new piece of Mclntosh.
TAKE ADVANTAGE OF 3 YEARS OF CONTRACT SERVICE . . . FILL IN THE APPLICATION NOW. Your CR10 Remote Control System will give you many years of satisfactory performance. If you have any questions, please contact, Mclntosh Laboratory Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 MclNTOSH THREE YEAR SERVICE CONTRACT An application for A THREE YEAR SERVICE CONTRACT is included with this manual. The terms of the contract are: 1.
A MclNTOSH CR10 REMOTE CONTROL SYSTEM WILL BE CUSTOM DESIGNED FOR YOUR PARTICULAR NEEDS. THE ACTUAL CAPABILITIES OF EACH SYSTEM WILL USUALLY BE DIFFERENT. THE PERFORMANCE FEATURES LISTED BELOW INDICATE THE RANGE OF CAPABILITIES OF THE CR10. YOUR OWN SYSTEM MAY USE ALL OR ONLY PART OF THE AVAILABLE COMBINATIONS. YOUR MclNTOSH DEALER WILL ASSIST YOU IN THE PROPER CHOICE OF ACCESSORIES AND COMPONENTS FOR YOUR PERSONAL SYSTEM REQUIREMENTS.
INTRODUCTION REMOTE IR SENSOR The R649 Remote IR sensor can be conveniently installed in a standard single wall outlet box at a remote location. The HR10 Hand Held Controller can transmit your system selections to this sensor. REMOTE AREA KEYPAD AND IR SENSOR A model WK-1 Keypad module can be installed in a double outlet box at a remote location. System selections can be made with the keypad pushbuttons, as well as with the HR10 Hand Held Controller which transmits to the IR sensor in the keypad.
The CR10 can be installed in a custom cabinet, or in a Mclntosh L72 equipment cabinet. Every CR10 Remote Control System is special, and can be customized for your particular needs. Your Mclntosh dealer can assist you in the design of the system configuration. Your dealer is also prepared to do both the installation and connections for you. INSTALLATION AND CONNECTIONS The back cover of this manual folds out to show photographs of the front pane! of the CR10 and the HR10 hand held remote controller.
CR10 FRONT PANEL PUSHBUTTONS AND DISPLAYS 9. MUTE AREA 1 Press this button to mute all sound in area 1. A CR10 front panel LED will turn on to indicate muting. Press again to restore sound. 10. SYSTEM OFF This pushbutton turns the entire CR10 system off. When a CR10 system is turned off, all area programming selections are canceled. Whenever the CH10 is turned on by an AREA PROGRAMMING POWER ON-OFF pushbutton, prior to any program selection, the CR10 automatically comes on with TUNER selected.
both the audio and video signals from a TV set, Laserdisc Player or Video recorder 1 or 2, or Video-Auxiliary. I. MUTE The MUTE button mutes the sound in any area where there is an IR sensor. HR10 PUSHBUTTONS J. VOLUME These pushbuttons raise or lower the audio volume in any area during operation or during programming. A. DATA PORTS Serial Data Ports are provided for the HC-1 Home Controller, as well as six accessory units. B.
REAR PANEL CONNECTIONS J. POWER CONTROL Connector to add the cable from a Mclntosh PC-1 Power Controller. This turns on AC power to each remote area power amplifier, when the area is turned on. It also provides switched AC power for five audio accessories, two video accessories and 3 unswitched outlets. The unswitched outlets provide AC power as long as the PC-1 power cable is connected to a live AC wall outlet.
SYSTEM CONFIGURATION EXAMPLE: 1. Four areas, with four dedicated power amplifiers and four dedicated pairs of loudspeakers. An IR wall mount sensor or Keypad in areas two, three and four. The CR10 is in area one. 2. INPUT SIGNAL SOURCES Mclntosh MR7083 AM-FM Tuner, with control cable. Mclntosh MCD7007 CD Player, with control cable. Stereo Cassette Tape Recorder. 3. PC-1 Power Controller connected. HOW TO SELECT A PROGRAM SOURCE AND VOLUME LEVEL FOR AREA 1 1.
YOUR REMOTE SYSTEM CONFIGURATION 12
YOUR REMOTE SYSTEM CONFIGURATION 13
SPECIFICATIONS FREQUENCY RESPONSE + 0, -0.5dB from 20Hz to 20,000Hz RATED OUTPUT VOLTAGE 2.5 volts SENSITIVITY All Inputs, 0.25 volts for 2.5 volts rated output TOTAL HARMONIC DISTORTION 0.
The letters correspond to the paragraphs on pages 8 and 9
The letters and numbers correspond to the paragraphs on pages 7 through 10
04010100 BE022003
