Specifications

PRODUCT PREVIEW
C38
System Control Center
Project 709
Contents
Promotional Highlights 1
Features and Benefits 1
Performance Specifications 2
Front Panel Controls 3
Rear Panel Information 4
Technical Description 5
Front Panel Drawing 7
Rear Panel Drawing 8
Precision Volume Control
Double Shielded Power Transformer
Electronically Regulated Power Supply
AC Switching for Accessories and Area A and B
Power Amps
Power Control Output
Auto Muting
Remote Power ON and Mute Indication
One Main and Two Switched Audio Outputs for
AREA A
Audio/Video Switching for 5 More Sources with
MVS-3
Home Control with the HC-1
Speaker Switching Through SCR3
Headphone Jack
Promotional Highlights
Infra Red Remote Control for Two Areas
Expandable to More Than 20 Areas
Separate LISTEN and RECORD Input Selection
Record Lock
Nine Program Source Selections
Logic Driven Electro Magnetic Switching
Serial Data Output Ports
Parallel Data Outputs for Tuner and Two CD Players
Active Variable Loudness Compensation
Exclusive Mclntosh Tone Control Circuit
Dual Processor Loops
Balanced Audio Outputs
Features and Benefits
IR REMOTE CONTROL FOR TWO AREAS
Two internal microprocessors, programmed by
Mclntosh, receive and decode signals from separate IR
sensors. One sensor is located on the front panel for
area A, the other connected to the area B external
sensor input. These microprocessors control the volume
and input selection logic of the LISTEN (A) and RECORD
(B) circuits. The customer has the option of using
RECORD circuits for tape recording or a second area
by adding an external sensor and another power amp.
RECORD LOCK
The front panel REC LOCK switch disables the area
B sensor input and turns off the area B power amplifier.
Recordings can not be interrupted.
AREA EXPANSION
A rear panel connector is provided to interface the
C38 with the CR10 Multi Room Remote Control System.
All audio and data connections are made by one cable.
MCINTOSH LABORATORY INC., 2 CHAMBERS STREET, BINGHAMTON, NEW YORK 13903