Owner's Manual

Headphones Jack

Connect a pair of dynamic headphones with a 1/4 inch

(6.3mm) stereo phone type plug to the Headphones

Jack for private listening.

HXD Mode

When Headphones are connected to the Front Panel

Headphone Jack, place the HXD

switch to the ON

position to activate the HXD

Circuitry. To deactivate

HXD

place the switch in the OFF position.

Note: HXD

improves the sound localization for Head-

phone Listening. HXD

restores the directionality

component of the spatial sound stage normally

heard with Loudspeaker listening.

Auto Off Switch

The C70 incorporates an Auto Off Feature, which

automatically places the preamplifier into the Power

Saving Standby/Off Mode. This occurs approximately

30 minutes after there has been an absence of user ac-

tivity (includes changes to any of the Operation Func-

tions such as source selection, volume adjustment, etc)

or absence of an audio signal. If it is desirable to dis-

able the Auto Off Feature, place the Rear Panel AUTO

OFF Switch in the DISABLE position.

Reset of Microprocessors

In the unlikely event the controls of the C70 stop func-

tioning, the microprocessors can be reset by placing

the Front Panel STANDBY/ON Switch in the RESET

position by holding it in for fifteen seconds and then

releasing the switch.

How to Operate, con’t