Instruction Manual

Customer Helpline 0345 605 2062
17
Step 5 - Use the x brush
Maintenance and Repair
WARNING! Always switch the product off, unplug from the power socket and let the product
cool down before performing inspection, maintenance and cleaning work!
- After every use wipe the machine with a slight damp cloth. Do not clean the machine using a
high-pressure water jet.
- Clean the high-pressure jet nozzle. The pressure washer is equipped with a water lter to
protect the pump. If the lter is not kept clean, the water ow to the machine will be restricted
and the pump may be damaged. To clean water lter, remove inlet adapter and get the lter
out.
- Rinse lter until it is free of debris and blockage.
- Replace the lter and inlet adapter.
Clearing of the Lime scale
From periods of time, water lime scale may build up on your lance outlet, use the Nozzle cleaning pin to
clean this away
Storing
Frost can damage your pressure washer that has not been completely emptied of water. The machine
should be stored in a frost free room.
Do not kink high pressure hose.
Maintenance and Repair