Instruction Manual

Customer Helpline 0345 605 2062

Step 2 - Stopping

1. Release the trigger, and engage the safety lock.

2. Set the On/Off switch to OFF.

3. Close the water supply.

Step 3 – Use the high pressure lance

WARNING!

- Always turn off the machine when changing the high pressure lance.-The trigger gun is

subjected to a recoil force when the water jet is discharged. Make sure that you have a rm

footing and are also holding the trigger gun and spray lance with both hands.

1. Hold the hand-held spray lance and the jet tube rmly with both hands. Be aware of the

recoil when switching on the high-pressure jet.

2. Unlock the safety button and press the trigger on the handheld spray lance.

- It takes approximately 5 seconds to release the high pressure.

- Clogging of the spray tips causes the pump pressure to be too high and cleaning is immedi-

ately required. You can clean the spray tips by carefully inserting a using the supplied cleaning

pin into the tip to remove deposits.

Operate