Instruction Manual

Customer Helpline 0345 605 2062

Step 7 - Connect socket

Make sure the ON/OFF switch is in the OFF position and your hands and plug are

dry. Connect the plug to the mains socket.

Note! We Recommend the use of a RCD Safety protection device.

Operate

Step 1 - Starting

WARNING!

Wear suitable clothing, ears and eyes protecting when working with the equipment. Ensure that

the equipment is functional before each use. Ensure that the mains voltage value matches the

label on the equipment. Check the safe condition of the machine:

– Check it for visual defects.

– Check that all parts of the machine have been securely tted.

– Check if the water connector and the high-pressure pipes are tight.

1. Place the high pressure washer on level ground. Stand in a secure and stable position.

2. Unlock the safety trigger on the spray gun, and press the trigger until there is a steady

stream of water.

3. Set the On/Off switch to ON.

Prepare