Instruction Manual

Customer Helpline 0345 605 2062

Prepare

Step 1 - Fit the high pressure hose to the washer

WARNING! Always wear safety gloves when doing any work on the pressure washer.

3. Connect the high pressure hose to the pressure washer. Attach high pressure hose to the

machine’s water outlet (hand tighten only).

Step 2 - Fit the trigger gun to the high pressure hose

Connect the hose and trigger gun. Screw the high pressure hose rmly onto the spray gun.

Step 3 - Fit the lance to spray gun

Insert the spray lance into spray gun, and twist 1/4 turn to lock in position.

NOTE! Check that it is rmly securely located in place.