Instruction Manual

27
Customer Helpline 0345 605 2063
WARNING!
Only perform the steps described within these instructions!
$OOIXUWKHULQVSHFWLRQPDLQWHQDQFHDQGUHSDLUZRUNPXVWEHSHUIRUPHGE\DQTXDOL¿HGVSHFLDOLVW
Always turn off the machine and remove the plug before making any adjustment.
Troubleshooting
General Troubleshooting
The following table provides solutions to common problems encountered with the mower.
Fault Possible Cause Solution
Mower does not start No power at mains socket Check the fuse, switch,
socket, cable, wire and have
any repairs carried out by a
TXDOL¿HGHOHFWULFLDQ
Defective on/off switch 5HSDLUE\DTXDOL¿HG
technician required
Defective motor
Grass too long Set at a higher cut setting. Lift
the front wheels slightly by
pressing down on the handle
bar.
Motor stops Blade is blocked Disconnect from mains and
remove blockage
8QWLG\¿QLVKPRWRUODERXUV Cut height too low Set a higher cut height
Blade blunt Sharpen or replace the blade
Blade area blocked Remove blockage
Blade assembled incorrectly Install the blade correctly
Blade fails to turn Blade blocked by grass Remove blockage
Blade bolt loose Tighten the blade bolt
Strange noises, rattling or
vibrations
Blade bolt loose Tighten the blade bolt
Blade damaged Replace the blade