Instruction Manual

22
Customer Helpline 0345 605 2063
Prepare
Step 4 - Setting the cutting height (continued)
Always switch the product off, disconnect it from power supply and let the product
cool down before performing inspection, maintenance and cleaning work!
Removing the blade and fan. USE GLOVES.
• To remove the blade bolt, hold the blade rmly and with the spanner provided loosen the
blade bolt.
• Remove the blade bolt, blade, spacer and impeller.
• Inspect for damage and clean as necessary.
Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner-
regardless of condition. If the blade is cracked or damaged replace it with a new one.
Never use a blade bolt if the insulated head is damaged cracked or missing.
Fitting the blade and impeller. USE GLOVES.
• Ensure the impeller is located correctly.
• Place the spacers onto the fan ensuring the pegs have located into the holes
• Ensure the pegs have located into the holes on the blade and that the blade is positioned
as illustrated in gure 6.
• Place the blade bolt through the centre hole of the blade.
• Tighten down clockwise by hand.
• Hold the blade rmly and tighten the blade bolt with the spanner provided.