Instruction Manual
Customer helpline 0345 605 2065
7
General safety
Safety information
Important - Please read these instructions fully before starting assembly
to avoid damages to the cords which can lead to contact with live
parts.
c) Before use, always visually inspect the machine for damaged,
missing or misplaced guards or shields.
d) Never operate the machine while people, especially children, or
pets are nearby.
3. Operation
a) Keep supply and extension cords away from cutting means.
b) Wear eye protection, long trousers and stout shoes at all times
while operating the machine.
c) Avoid using the machine in bad weather conditions especially
when there is a risk of lightning.
d) Use the machine only in daylight or good articial light.
e) Never operate the machine with damaged guards or shields or
without guards or shields in place.
f) Switch on the motor only when the hands and feet are away from
the cutting means.
g) Always disconnect the machine from the power supply (e.g.
remove the plug from the mains)
1) whenever the machine is left unattended;
2) before clearing a blockage;
3) before checking, cleaning or working on the machine;
4) after striking a foreign object;
5) whenever the machine starts vibrating abnormally.
h) Take care against injury to feet and hands from the cutting
means.
i) Always ensure that the ventilation openings are kept clear of
debris.
j) Never t metal cutting elements.
k) Always be sure of your footing on slopes.
l) Walk, never run.
m) Not overreach and keep the balance at all times.
n) Not to touch moving hazardous parts before the machine is