ORIGINAL INSTRUCTION MANUAL McGregor 18V Cordless Grass Trimmer 7606713/7589892 (Model: MCT1825/MCT2X1825) Important - Please read these instructions fully before starting assembly These instructions contain important information that will help you get the best from your grass trimmer, ensuring it is assembled correctly and safely.
Contents Safety information…………………….…………………………............................................……………........3 In the box…………………………………………….................................................................……………. 11 Assemble………………………………………………………………....................................……………….. 12 Prepare......................................................................................................................................................14 Operate..........................................................
Safety information Important - Please read these instructions fully before starting assembly Warning symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the grass trimmer. This symbol indicates there is a danger of serious personal injury or death if you do not observe the warning.
Safety information Important - Please read these instructions fully before starting assembly Personal safety WARNING! Only operate the grass trimmer if you are wearing the correct Personal Protective Equipment (PPE) as described in the following warnings. Warning symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the grass trimmer.
Safety information Important - Please read these instructions fully before starting assembly Warning symbols Double insulation Li-Ion Li-Ion battery. Do not dispose of batteries, Return exhausted batteries to your local collection or recycling point. Do not expose to rain or water Do not burn Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice.
Safety information Important - Please read these instructions fully before starting assembly General safety WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Safety information Important - Please read these instructions fully before starting assembly General safety to avoid damages to the cords which can lead to contact with live parts. c) Before use, always visually inspect the machine for damaged, missing or misplaced guards or shields. d) Never operate the machine while people, especially children, or pets are nearby. 3. Operation a) Keep supply and extension cords away from cutting means.
Safety information Important - Please read these instructions fully before starting assembly General safety disconnected from the mains and the moving hazardous parts have come to a complete stop. 4. Maintenance and storage a) Disconnect the machine from the power supply (e.g. remove the plug from the mains) before carrying out maintenance or cleaning work. b) Use only the manufacturer’s recommended replacement parts and accessories. c) Inspect and maintain the machine regularly.
Safety information Important - Please read these instructions fully before starting assembly Additional safety instructions for your battery charger 13.Keep battery charger’s slots are free of foreign objects and protect against dirt and humidity. Store in a dry and frostfree place. 14.When charging batteries, ensure that the battery charger is in a well-ventilated area and away from inflammable materials. Batteries can get hot during charging. Do not overcharge any batteries.
Safety information Important - Please read these instructions fully before starting assembly Safety warnings for battery pack e) In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. f) Seek medical advice immediately if a cell or battery pack has been swallowed. g) Keep battery pack clean and dry.
In the box Parts 1 Front handle 11 Flower guard 2 Front handle locking knob 12 Spool head cover 3 Lock-off button 13 Line cutter 4 On/Off switch 14 Cutting line 5 Battery pack release button 15 Cap release latch (on both sides) 6 Battery pack 16 Line feed button 7 Handle rotation locking button 17 Battery charger 8 Height adjustment locking collar 18 Instruction manual 9 Safety guard 10 Spool head A 3 4 5 6 1 2 7 8 18 13 12 16 15 14 11 10 9 17 Customer helpline 0345 605 2065 11
Assemble Assembling instructions Always take care when removing the packaging to prevent damage to you or to the grass trimmer. IMPORTANT! Before assembling the grass trimmer, check all the parts indicated in the manual are in the box. Inspect all the parts for signs of damage. Do not assemble the grass trimmer if you observe any damaged components. NOTE: Before using the tool, read the instruction book carefully.
Assemble Assembling instructions 2. REMOVING THE BLADE PROTECT LABEL (SEE FIG. B) The blade is covered with a protect label. Please remove it before operation. B 3. TO CHARGE THE BATTERY (See Fig. C) Chargers and batteries are specifically designed to work together. Do not attempt to use batteries with any other charger than that specified in these instructions. Important notes for charging the battery: In a warm environment or after heavy use, the battery pack may become too hot to permit charging.
Prepare Preparing instructions 1. ADJUST THE HEIGHT (See Fig. E1, E2) 1) Unscrew the height adjustment locking collar in the direction indicated to unlock, turn it counterclockwise. 2) Adjust the length of the Aluminum tube to the most comfortable length. 3) Tighten the locking collar in the direction indicated to lock, turn it clockwise. E2 E1 2. ADJUSTING THE FRONT HANDLE (See fig. F) 1) Press the front handle locking knob . 2) Rotate the front handle to the most comfortable and balanced position.
Prepare Preparing instructions 4. FLOWER GUARD (See Fig. H) Lift the flower guard up when edging and put it down before trimming, as shown in Figure G. Before trimming or edging make sure the flower guard is locked firmly in position. H 5. SAFETY ON/OFF SWITCH (See Fig. I) The safety switch is locked off to prevent accidental starting. 1) Depress the Lock off button then depress the On/Off switch and release lock off button. Your trimmer is now on. 2) To switch off, just release the on/off switch.
Operate Operating instructions WARNING: Always wear eye protection. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury. When operating unit, check for the following: Wear eye protection and heavy clothing. Hold front handle with one hand and auxiliary handle with the other hand. Keep unit below waist level. Work only from your right to your left to ensure debris is thrown away from you.
Operate Operating instructions 2. EDGING Change the tool from trimming to edging mode 01: 1) Adjust the cutting angle to be in the lowest horizontal setting as shown in Fig. K1. 2) Push the handle rotation locking button downward and rotate the main handle clockwise at 90 degree(Fig. K2, K3). K1 K2 2 1 K3 Change the tool from trimming to edging mode 02: 1) Adjust the cutting angle to 30 degree to 50 degree as shown in Fig. K4.
Operate Operating instructions 3. AUTOMATIC LINE FEED SYSTEM When initially switching on the trimmer, a small length of line is fed out. A ‘clattering’ noise will be heard when the lines hit the line cutter. DO NOT BE ALARMED, this is quite normal. After about 5 seconds the line will be cut to the correct length and the noise will reduce as the motor receives full speed. If the noise of the line being cut can’t be heard, more line will be fed out.
Operate Operating instructions 6. WHEN REFITTING THE SPOOL CAP. Keep all areas of the cap and spool holder clean. Refit the cap, pressing firmly down towards the spool holder to ensure cap is fully located. Check that the cap is correctly fitted by trying to remove it without depressing the two latches. 7. TO REPLACE CUT LINE. For your convenience it is recommended you buy spool and line complete. -- TO FIT SPOOL AND LINE COMPLETE: 1) Remove old spool. 2) Place new spool into cutting head.
Maintenance and storage Maintenance Important note: Always remove battery before cleaning, repair and storage. 1. Always remove the battery pack whenever you carrying out any cleaning or repair. 2. Keep the motor ventilation slots clean. 3. Your tool requires no additional lubrication or maintenance. There are no user serviceable parts in your tool. 4. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. 5. Always check the cutting head and guard before each use. 6.
Technical data Noise and technical date A weighted sound pressure KpA=3 dB (A) A weighted sound power Wear ear protection. VIBRATION INFORMATION Typical weighted vibration ah= 1.8m/s2, uncertainty K= 1.
Troubleshooting General troubleshooting The following chart lists problem symptoms, possible causes and corrective action, if your electric grass trimmer does not operate properly. If these do not identify and correct the problem, contact your helpline.
Getting help Customer helpline 0345 605 2065 Guarantee Dear Customer, In the unlikely event that your device develops a fault, please contact our Customer service department on the telephone number shown below. 1. These guarantee terms cover additional guarantee rights and do not affect your statutory warranty rights. Claims must be accompanied by Proof of Purchase.
