ORIGINAL INSTRUCTION MANUAL McGregor 18V Cordless Hedge Trimmer 7509047/7409855(Model: MCH1845/MCH1851) Important - Please read these instructions fully before starting assembly These instructions contain important information that will help you get the best from your hedge trimmer, ensuring it is assembled correctly and safely.
Contents Safety information…………………………………………....…………….................................……………........3 In the box…………….……………………………...…………………….......................................…………….14 Assemble………………………………………………………………....................................……………….. 15 Prepare……………………………………………………………...……...................................……………….. 15 Operate........................................................................................................................................18 Maintenance.......
Safety information Important - Please read these instructions fully before starting assembly Warning symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the hedge trimmer. This symbol indicates there is a danger of serious personal injury or death if you do not observe the warning.
Safety information Important - Please read these instructions fully before starting assembly Personal safety WARNING! Only operate the grass trimmer if you are wearing the correct Personal Protective Equipment (PPE) as described in the following warnings. Warning symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the Hedge Trimmer.
Safety information Important - Please read these instructions fully before starting assembly Warning symbols Read the operator’s manual. T 2A Fuse Positive terminal Negative terminal Double insulation Li-I on Li-I on Li-ion battery. This product has been marked with a symbol relating to ‘separate collection’ for all battery packs and battery pack. It will then be recycled or dismantled in order to reduce the impact on the environment.
Safety information Important - Please read these instructions fully before starting assembly General power tool safety warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Safety information Important - Please read these instructions fully before starting assembly General power tool safety warnings electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Safety information Important - Please read these instructions fully before starting assembly General power tool safety warnings f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dustrelated hazards.
Safety information Important - Please read these instructions fully before starting assembly General power tool safety warnings g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) Battery tool use and care a) Recharge only with the charger specified by the manufacturer.
Safety information Important - Please read these instructions fully before starting assembly Hedge trimmer safety warnings 1. Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. A moment of inattention while operating the hedge trimmer may result in serious personal injury. 2. Carry the hedge trimmer by the handle with the cutter blade stopped.
Safety information Important - Please read these instructions fully before starting assembly General safety warnings for your battery charger instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Safety information Important - Please read these instructions fully before starting assembly Additional safety instructions for your battery charger inflammable materials. Batteries can get hot during charging. Do not overcharge any batteries. Ensure that batteries and chargers are not left unsupervised during charging. 15.Do not recharge non-rechargeable batteries, as they can overheat and break. 16.
Safety information Important - Please read these instructions fully before starting assembly Safety warnings for battery pack amounts of water and seek medical advice. f) Seek medical advice immediately if a cell or battery pack has been swallowed. g) Keep battery pack clean and dry. h) Wipe the battery pack terminals with a clean dry cloth if they become dirty. i) Battery pack needs to be charged before use. Always refer to this instruction and use the correct charging procedure.
In the box Parts 1 Blade 6 Battery pack 2 Safety guard 7 Blade sheath 3 Front handle with safety switch Battery charger 4 5 Rear handle 8 9 On/off switch 10 Instruction manual 1 2 Battery pack release button 3 4 5 9 7 8 10 14 Customer helpline 0345 605 2065 6
Assemble Assembling instructions The hedge trimmer has been already assembled, You needn’t to assemble. Prepare Preparing instructions Always take care when removing the packaging to prevent damage to you or to the hedge trimmer. IMPORTANT! Before assembling the hedge trimmer, check all the parts indicated in the manual are in the box. Inspect all the parts for signs of damage. Do not assemble the hedge trimmer if you observe any damaged components.
Prepare Preparing instructions 2. TO REMOVE OR INSTALL BATTERY PACK (See B1, B2) Depress the Battery pack release button to release battery pack from your hedge trimmer. After recharging, insert the battery pack into hedge trimmer’s battery port. A simple push and slight pressure will be sufficient. WARNING! DO NOT USE THE PRODUCT WITHOUT ATTACHING THE GUARD. B1 B2 3. BEFORE STARTING YOUR HEDGE TRIMMER Remove blade sheath as illustrated in Fig C. C 4.
Prepare Preparing instructions PAY ATTENTION TO USE YOUR HEDGE TRIMMER Inspect the area to be cut before each use, remove objects which can be thrown or become entangled in the cutting blades. Always hold the Hedge trimmer with both hands and with the blade away from you before turning it on. When trimming new growth, use a wide sweeping action so that the stems are fed directly into the blade. Allow the cutting blades to reach full speed before entering the material to be cut.
Operate Operating instructions 1. TOP EDGING (See Fig E) Use a wide sweeping motion. A slight downward slant of the cutting blades in the direction of motion gives the best cutting results. E 2. SIDE EDGING(See Fig F) When trimming the sides of the hedge, begin at the bottom and cut upwards, You should taper the hedge inward at the top. This shape will expose more of the hedge, resulting in a more uniformed growth. WARNING: Check extension cords before each use. If damaged replace immediately.
Maintenance Maintenance WARNING: Remove the battery before carrying out any adjustment, servicing or maintenance. 1) Never use water to cleaning the unit. 2) Always clean the hedge trimmer immediately after use. Brush the blade using a stiff nylon brush to remove any debris. 3) Always store the unit in a dry place. 4) Inspect the hedge trimmer before each use. 5) Have the unit professionally repaired if any damage occurs.
Technical data Noise technical date A weighted sound pressure LpA = 65.7dB(A) KpA=3 dB (A) A weighted sound power LwA = 79.8dB(A) Wear ear protection. VIBRATION INFORMATION Typical weighted vibration ah= 2.207m/s2, uncertainty K= 1.
Troubleshooting General troubleshooting The following chart lists problem symptoms, possible causes and corrective action, if your electric hedge trimmer does not operate properly. If these do not identify and correct the problem, contact your service agent. WARNING: Always switch the product off, disconnect it from power supply and let the product cool down before performing inspection, maintenance and cleaning work! Problem Possible cause Solution Hedge trimmer does not operate 1.
Getting help Customer helpline 0345 605 2065 Guarantee Dear Customer, In the unlikely event that your device develops a fault, please contact our Customer service department on the telephone number shown below. 1. These guarantee terms cover additional guarantee rights and do not affect your statutory warranty rights. Claims must be accompanied by Proof of Purchase.
