User`s manual

mcdsp.com
Page 34
Chrome Tone
User’s Manual
Many of the Chrome Tone plug-In congurations can operate on the same dsp, depending on the conguration’s dsp
requirements. Below the percentages of each HD or HD Accel dsp used by a single instantiation of a Chrome Tone plug-
In conguration are shown:
Maximum Instantiation Counts per HD & HD Accel DSP at 48 kHz sample rate with full pull up mode
(Stereo).
Configuration (Stereo) # Instantiations per DSP on
HD systems
# Instantiations per DSP on
HD Accel systems
Amp 1 2
Wah 5 10
Chorus 4 8
Tremolo 7 14
Stack 1 2
For HD systems, Chrome Tone supports all higher sample rates (96 kHz only). However due to the dsp usage of some
of the larger Chrome Tone congurations, not all congurations are available at the higher sample rates. For 96 kHz
operation the dsp usage is doubled (x 2).
ProTools|24, Nubus, and MIX DSP hardware
The processing requirements of the Chrome Tone plug-In exceed the capacity of the ProTools|24 (Classic DSP Farm)
and Nubus dsp hardware. While McDSP recognizes the signicant population of ProTools users who operate on these
hardware cards, Chrome Tone is too large an algorithm to be supported on the ProTools|24 and Nubus hardware.
Digidesign™ and Pro Tools™ are registered trademarks of Digidesign, Inc.