User`s manual

mcdsp.com
Page 16
Chrome Tone
User’s Manual
A Look at the Chrome Tone Stack Configuration
The Chrome Tone Stack conguration is a combination of the Wah, Tremolo, Amp, and Chorus congurations, grouped
into pages of controls. Each control page is setup exactly as the individual congurations. Page selector and bypass
controls are found in the upper left hand corner of the user interface. Clicking the Page labels displays the controls for
that page. Clicking the LED under each Page label enables (or disables) that section of the Stack conguration.
Fig 3.13 – Chrome Tone Stack Configuration - Wah Page
The Chrome Tone About Box
The Chrome Tone About Box contains information on the Stack and Amp conguration ow diagrams. The About Box
can be accessed by clicking the version text in the user interface of any Chrome Tone conguration.
Fig 3.14 – Chrome Tone About Box
General Information
To adjust any of the controls (including the pop-up sliders for Groove Wah, Trem, Chorus, and Stack congurations), just
click the control name), you can:
• Click and drag the knobs in up/down or left/right motion (the knob will lock to only up/down or left/right motion
once a click and drag movement is started), or
• Click and hold the knobs in the upper half of the knob to slowly increase control values, or in the lower half of the
knob to slowly decrease control values, or
• Hold the <Command> key while dragging the slider for ne control, or
• Click on the text box to highlight and edit the numeric value to get precise control (if a value outside the valid range
is input, the control will default to the nearest allowed value when enter is hit) and hit <Enter>, or