User manual

Page 16
A Closer Look at the Chrome Tone Stack
The Chrome Tone Stack conguration is a
combination of the Wah, Tremolo, Amp, and
Chorus congurations, grouped into pages of
controls. Each control page is setup exactly as the
individual congurations. Page selector and bypass controls are found in the
upper left hand corner of the user interface. Clicking the Page labels displays
the controls for that page. Clicking the LED under each Page label enables (or
disables) that section of the Stack conguration.
The Chrome Tone Stack’s Wah, Trem, and Chorus sections use the same Dynamic
and Auto sections found in the individual congurations to modulate the gain in
its tremolo circuit. For a detailed description of the Dynamic and Auto sections,
refer to the ‘Closer Look at the Chrome Tone Wah’ portion of this manual.
The Chrome Tone About Box contains information on the Stack and Amp
conguration ow diagrams. The About Box can be accessed by clicking the
version text in the user interface of any Chrome Tone conguration.
Chrome Tone About Box
Note how the Low Cut Filter and Noise
Gate from the Amp section are still
the rst effects in the signal chain.
Removal of unwanted noise is critical
before such a long series of effects
is processed. The Wah and Tremolo
sections are placed in front of the
Compressor and Sustainer sections, as
well as the Distortion and EQ sections.
The Chorus and Reverb are last in the
signal chain.