User`s manual
mcdsp.com
Page 25
McDSP NF575
• Click on the text box to highlight the numeric value and then use the arrow
keys to increase or decrease the numeric value, or
• Use the <Option> key to bring all the controls to their default values, or
• Use hardware controller surfaces supported by the NF575 plug-in including
the Mackie HUI and Digidesign’s ICON™, ProControl™ and Control 24.
Control Linking
The NF575 Noise Filter allows the frequency controls of its ve notch lters to
be linked at any frequency interval. By clicking the link button located just to
the left of the notch 1 frequency controls, all frequency controls will be updated
when the notch frequency control in notch 1 is updated.
Automation
All NF575 Noise Filter controls are completely automatable. See the Digidesign™
Pro Tools™ Reference Guide, Automating Plug-Ins section.
Presets: Using the Presets and Making Your Own
The NF575 Noise Filter preset library demonstrates the wide range of
applications the NF575 can be used. No preset will suit every application, and
they have been provided as a guide for the user, and will hopefully inspire new
ideas and ways to use this sophisticated plug-in.
The presets can be accessed from the Pro Tools™ “Plug-In Librarian” and “Plug-
In Settings” pop-up menus.
To make and save your own presets, see the “Plug-In Librarian Functions” section
of Digidesign‘s DigiRack Plug-Ins Guide.
A Word on Preset Compatibility
Presets for the NF575 congurations are interchangeable.
Pro Tools™ is a registered trademark of Digidesign, Inc.