User`s manual

mcdsp.com
Page 21
McDSP NF575
The Quick Start Tour: The NF575 Plug-In
Start Pro Tools™ and Instantiate the NF575 plug-In
• Launch Pro Tools™ and Open a Pro Tools™ Session.
• Verify the Display-> Mix Window Shows->Inserts View option is checked.
• In one of the inserts of a stereo master fader, select the NF575 plug-in. Note
the NF575 plug-in will operate on master or regular audio tracks in mono or
stereo versions.
• If the insert selection does not show the NF575 plug-In, verify that the NF575
plug-in has been installed correctly.
• For more information on starting Pro Tools™ and working with Plug-Ins, see
Digidesign’s™ Pro Tools™ Reference Guide
NF575 Overview
The NF575 Noise Filter is a specially designed set of algorithms for removing
unwanted noise from audio, with as little effect on the original audio as
possible. Five linkable notch lters are complimented by steep high pass
and low pass lters. There are Q/Slope adjustments for each lter band, and
frequency control ranges cover the entire audible spectrum. Each notch lter
has an adjustable notch cut, and the frequency controls of all notch ltered can
be linked at any frequency interval (harmonic or other relative offset).
The NF575 is the ideal choice for noise ltering.