Install Instructions

5
a. Using a pipe wrench, remove the float blocking plugs (I)
and dowels (H) from the control as shown below.
b. Using a pipe wrench, screw the pipe plugs provided with
control into the open tappings.
STEP 3 - Removing Float Blocking Plugs and Dowels
I
H
I
H
Series 93 / 94
Series 193 / 194
CAUTION
The plug and rod must be reinstalled before control is shipped installed on the
boiler, and removed after boiler is placed and installed.
Failure to follow this caution may damage the float and operating mechanism.
!