User manual

Miscellanous information Operating guide for Alarm Receiver Exprecium D 37|52
MCDI SECURITY PRODUCTS INC. 7055 Jean-Bourdon Montréal Québec Canada +514.481.1067 www.mcdi.com [e-mail]
Code definitions
HH : Hour
: : Character ":"
mm : Minute
DD : Day
_ : 1 space
_ _ : 2 spaces
MM : Month
[YY] : Year [Present/Absent] Receiver Option)
/ : Character "/"
R : Receiver number (Receiver Option)
L : Line number (Receiver Option)
C : Account number
A : Event code or modifier
E : Zone type FBI super Fast
Z : Zone
G : Group (Partition)
T : Type(E or R) (Contact ID)
Ø : Zero
<CR> : EOS (Carriage Return)
<ACK> : Data retransmits to computer every 2 second until ACK is received by DECRYPTA II (ACK=06H or
$06).
@ : Heartbeat signal Receiver Option)
t...t : Telephone number from Caller ID
[ : Beginning data delimiter (SIA)
] : Ending data delimiter (SIA)
| : Field separator (SIA)
# : Account ID block code (SIA)
E : Function block code (SIA)
/ : Data code packet separator (SIA)
<LF> : Line Feed
D4
Error and Warning messages sent to Printer port and PC:
HH:MM MM/DD[YY] RL Account XYY
Printer message Time Date Receiver 0000 01 Printer error
Time Date Receiver 0000 02 Printer reset
Telephone line monitoring Time Date Receiver 0000 03 Error Line 1
Time Date Receiver 0000 04 Reset Line 1
Telephone line monitoring Time Date Receiver 0000 05 Error Line2
Time Date Receiver 0000 06 Reset Line2
Transmission message Time Date Receiver 0000 00 Bad transmission
Time Date Receiver [#0000|NRT000] Format SIA
No Transmission Time Date Receiver 0000 F1 Not a valid signal Line 1
Time Date Receiver 0000 F2 Not a valid signal Line 2
Transmission to computer and printer in ADEMCO 685 / Surgard emulation mode
For information on transmission See ADEMCO 685 standards
For information on transmission See Surgard MRL2 documentation
Surgard emulation applies to Dial up Alarm signals and Telephone ID
Messages from Ed to Ed printer port
When computer ceases to answer: "Computer absent" is sent to printer. Icon of main port will display broken link. PC led will
shut down.
When computer answers: "Computer restore" is sent to printer. Icon of main port will display link. PC yellow led will light back
on