User manual

CONFIGURATOR :: PC tool Operating guide for Alarm Receiver Exprecium D 13|52
MCDI SECURITY PRODUCTS INC. 7055 Jean-Bourdon Montréal Québec Canada +514.481.1067 www.mcdi.com [e-mail]
EXd_D4_configurator
Ed can be configured using the PC tool from a connected PC. Use of this PC tool is required for some functions such as Name of
the device and Owner's name. It is also mandatory for upgrading the Firmware of the receiving and peripherals logic of D4.
Languages available as of June 2012: English, French, German, Italian, Portuguese, Russian and Spanish, more languages can
be integrated in the PC configuration tool.
Latest configurator version is available from
http://mcdi.com/tools/d4.zip
Configurator is common to Exprecium D and Decrypta 4. Some features may apply only to one model or the other. If your Ed/D4 is
more than one year old, please check first with MCDI support to insure this version is compatible with your Ed/D4. Please provide
your serial number from the back of unit.
Requirements to install EXd_D4_configurator
Windows XP, Vista or 7 with administrator privileges. Initial installation
requires administrator privileges for installation of .Net framework.
Installing EXd_D4_configurator Installation requires administrator privileges. It will installs Microsoft .Net framework 2.0 if
no .Net framework is found.
Run the EXd-D4(vX.X.X).exe. This will install necessary USB drivers, and .Net framework (if not already installed) and
Configuration application.
Launching Configurator
While it may be possible to launch Configurator without a Ed or D4 connected, there is not benefit
to it. Configurator application is made to be used with a connected MCDI Ed or D4.
Configurator description
Main/first configuration form