User manual

Default parameters Operating guide for Alarm Receiver Decrypta 4 12|52
MCDI SECURITY PRODUCTS INC. 7055 Jean-Bourdon Montréal Québec Canada +514.481.1067 www.mcdi.com [e-mail]
DEFAULT PARAMETERS The following parameters are the factory default. They are written in a non erasable
boot loader (except if firmware is reprogrammed under MCDI's guidance). Resetting the receiver to Factory Default from the
SYSTEM menu will revert receiver to the following:
Language English
Line options:
Line 1: yes
Line 2: yes
Line number: 001/002
Receiver number: 001
Wait after off-hook: no
Number of rings: 1
Listen-in code: blank
Listen time out: 180 seconds
Formats: Pulse, DTMF, SIA selected, all others de-selected.
Handshake sequence: 1400Hz/SIA/Contact ID/2300HZ
Auto handshake: yes
Communication speed:
Reporting to PC speed: 115200
Serial printer speed: 38400
Output options:
Main: Serial
Secondary: None
Caller ID: None
Format: MCDI
Caller ID, All events: No
Enhanced mode: No
3x2 instead of 4x1: No
Check Printer: No
Compress/extended: No
Send date/time SG: Yes
Send year SG: No
Check Line: Yes
Hearbeat: Yes
Acknowledge delay: 1 second
Clear Zero: No
Sescoa SS vs 4x2 CS: No
4x1, 4x1,4x3 Morph: blank