Installation guide

Page 8
Installation guide for Alarm Receiver Exprecium
MCDI Inc. Internet: http://www.mcdi.com
86 Claude-Champagne Avenue, Montreal, QC, Canada H2V 2X1 Telephone: [phone] Fax: [phone]
Parameter section to the right of Address section
Move cursor to desired parameter using UP/DN arrow. Key in each new parameter .
After all changes have been entered press <ESC> to go back to Address Section.
ONLY in Address Section can changes be saved and sent to receiver.
Parameter definition
Emulation mode easy setting information:
MCDI Mode Default setting
Ademco 685 Mode Default setting + Date / Time = NO
Surgard Mode Surgard = YES
OPTIONS: ( default settings are indicated in bold )
Receiver Number sent to computer and printer 0 to F 1
Line 1 Number sent to computer and printer 0 to F 1
Line 2 Number sent to computer and printer 0 to F 2
Heartbeat Yes = enable No = disable
Heartbeat signals are sent to computer every 30 seconds only in MCDI and Surgard mode.
Sescoa SS Yes = enable No = disable
Conflict with Pulse 4X2 Checksum format
3x2 Instead 4x1 Yes = enable No = disable
Conflict with 4X1 in Compressed Expanded
DO NOT select with Compressed Expanded = YES
Clear Zero Yes = Zero removed in 3x1 and 4x1 No = zero present
Tells the receiver
not to insert a zero in front of the account number and in front of the alarm code, for
incoming 3 x 1 and 4 x 1.
Example: 3 x 1 Extended compressed in 3 x 2 standard
123 4
444 5 After compression: 123 45
Example: 3 x 1 Standard 3 x 1
123 1
Example: 4 x 1 Standard 4 x 1
1234 1
Example: 3 x 1 and 4 x 1
without the CLEAR ZERO option:
0123 01 for 3 x 1
1234 01 for 4 x 1
Compressed/ Yes = Compressed extended 3x1 or 4x1 No = default
Extended
Example:3 x 1 Extended compressed in 4 x 2 standard
123 4
444 5 After compression: 0123 45
Example:4 x 1 Extended compressed in 4 x 2 standard
1234 5
5555 6After compression: 1234 56
Listen-In Empty or 1 .. F Empty
(3x1,4x2) Define code to trigger Listen-In mode in 3x1 or 4x2 formats
Printer/Buzzer Yes = Check printer on Exprecium port No= Do not check for printer