Installation guide

Page 6
Installation guide for Alarm Receiver Exprecium
MCDI Inc. Internet: http://www.mcdi.com
86 Claude-Champagne Avenue, Montreal, QC, Canada H2V 2X1 Telephone: [phone] Fax: [phone]
Using WINCOM utility :
Within Windows, double click on the WINCOM icon.
Select SETTINGS and set the COM port to match the EXPRECIUM COM port. If you only have one Exprecium
installed in your system, the COM port address should be COM5. Then click
OK. Do not change other parameters
since they are already set to match your Exprecium card.
Function of each button :
OPEN To start monitoring the selected port.
SETTINGS To select the proper COM port address to be viewed.
SEND ACKTo acknowledge each signal one by one.
ENABLE ACKTo acknowledge all signals
Use the CLEAR SCREEN button to clear the display.