User manual

DESCRIPTION Page 8 | 41
Operating guide for Alarm Receiver DECRYPTA
3
MCDI Security Products Inc.. Internet: mcdi.com
7055 Jean-Bourdon Avenue, Montreal, QC, Canada H4K 1G7 Telephone: [phone] Fax: [phone]
2. Installation of MCDI Axe configurator 0.1.0
Requirements:
MS Windows XP
Sun’s Java Runtime Environment (JRE) 2. Located on CD.
Axe Configurator Installation
The installation procedure is very simple. To start the installation, run the installer program, Axe_install_0.1.0.exe:
1. It will prompt you for the language you want the installer to run in.
2. The license is displayed. Read it carefully and then click on “I Agree” to agree with the licensing terms.
3. Select the directory in which the Axe Configurator will be installed or accept the default settings, then click on “Install”.
4. You will see the progress of the installation. If you want to see where and which files are being copied, click on “Show
Details”.
5. Press “Close” when finished
A few shortcuts are created for your convenience:
1. On your desktop
2. In the Start Menu, under Start Programs MCDI Axe Configurator
Un-installation
You can un-install Axe Configurator in two ways:
1. From the Control Panel: select Start Settings Control Panel. Then select “Add or remove programs”, choose “Axe
Configurator” from the list and follow the un-installation procedures.
OR
2. Directly : select Start Programs MCDI Axe Configurator Uninstall and follow the un-installation procedures.
Usage
At the startup, you will see the following welcome screen to
configure a device, select it from the device list:
NOTE: The configurator tries to detect what kind of receiver
is connected to the PC. Yet sometimes it’s necessary to
actually start the process of retrieving the configuration in
order to completely determine what kind of receiver it is.
Thus, in the device menu you may see:
“Exprecium” for Exprecium I and II cards
“Serial” for any device attached to physical COM port, for example, Decrypta or the serial port connection of DECRYPTA
3
.
“USB DECRYPTA
3
for the USB connection of the DECRYPTA
3
.
When you select receiver, its configuration settings will be retrieved, and you will see different configuration screens according to
the type of the receiver (see section “Configuration screens”).
Setting language of the Axe Configurator
You can select English, French, Spanish, German, or Russian. To set the language, select it from the menu Options  Language.
Starting other MCDI software from Axe Configurator
You can start WinSAMM, WS Receiver, Traffic Logger, or WinCOM from the Traffic Connect To menu. To set paths to those
programs, select Traffic Settings.