User manual

DESCRIPTION Page 7 | 41
Operating guide for Alarm Receiver DECRYPTA
3
MCDI Security Products Inc.. Internet: mcdi.com
7055 Jean-Bourdon Avenue, Montreal, QC, Canada H4K 1G7 Telephone: +514-481-1067 Fax: +514-481-1487
Configuring DECRYPTA
3
receiver by software
MCDI winExprecium2.exe
There is no switches or jumpers to configure
your card. All settings are done using the setup
program called winExprecium2.exe ( provided
on the media coming with your card ). This
program works under Windows and can be
executed from any disk drive. To use it under
Windows, your Windows drivers must be
installed first and properly configured.
To enter the configuration menu double click
on the icon winExprecium2.exe
The following display will appear :
MCDI Axe and Logger tools
Axe configurator is a universal tool for configuring
MCDI receivers. Currently it supports the following
receivers:
Exprecium (I and II version)
USB DECRYPTA
3
The support for other MCDI receivers will be done in a
near future.
Logger is a software tool to log to disk
DECRYPTA
3
raw output . Logged data may
be read by word processors and Excel for reporting or
/and analysis.
1. JAVA RUN TIME ENGINE Installation
If you dont have Suns JRE installed you can install it
from the CD. It is located in \
Configurator_logger\Java_installer\ directory. To
install, run the installer program j2re-1_4_2_04-
windows-i586-p.exe. Under Windows XP you will
need administrative privileges in order to install JRE.