User manual

DESCRIPTION Page 26 | 41
Operating guide for Alarm Receiver DECRYPTA
3
MCDI Security Products Inc.. Internet: mcdi.com
7055 Jean-Bourdon Avenue, Montreal, QC, Canada H4K 1G7 Telephone: [phone] Fax: [phone]
3. Verification
You can verify the correct instalation of DECRYPTA
3
by
looking at Windows Device Manager (Fig. 8) or you can directly go to
MCDI Configurator tool. Device Manager is located at Start>Control
Panel>System>>Hardware tab>>Device Manager
Click on tab Hardware and then select Device manager.
In Ports (COM &LPT), USB Decrypta 3 (COM N) will be
displayed for each DECRYPTA
3
connected along
with the COM port in use for each DECRYPTA
3
unit
connected via USB.
4. Changing COM Ports for USB DECRYPTA
3
Assigning a new com port to a DECRYPTA
3
is easily done.
COM port can be changed manually by double clicking in each
individual USB DECRYPTA
3
in the Device manager. A new
Properties windows (Fig. 10) will be displayed. In Port Settings>>
Advanced a new window Ports will be displayed (fig.
11). Com port number can be changed to desired
port. It is not advisable to change other parameters.
To register changes click on OK in Port Settings
window and OK in the Properties window. Settings
will not be registered before this is done. In the Device Manager clicking on Refresh icon will bring a new enumeration
with changes.
You can now change internal settings of DECRYPTA
3
using your PC and MCDI Configurator tool.
Fig. 8
Fig. 9
Fig. 10
Fig. 11