User manual

DESCRIPTION Page 24 | 41
Operating guide for Alarm Receiver DECRYPTA
3
MCDI Security Products Inc.. Internet: mcdi.com
7055 Jean-Bourdon Avenue, Montreal, QC, Canada H4K 1G7 Telephone: [phone] Fax: [phone]
Connexion of DECRYPTA
3
under Windows XP or Windows 2000. First time installation
USB port enables a rapid and easy deployment of peripherals such as DECRYPTA
3
. Follow the steps enumerated in
this section to enable USB communication between your PC and a DECRYPTA
3
Alarm Receiver. This procedure is
common to Windows XP and Windows 2000. The procedure demonstrates a first time installation.
1. Specify the location of the directory containing drivers.
Windows takes care of bringing on screen a new hardware dialog
box (fig. 1) upon first installation. At this point you should insert
the DECRYPTA
3
CD supplied with your unit.
Select the Recommended option : ‘Install the software
automatically’ and click on Next
Windows will display a new window (fig.2) to locate the
direcrtory containing DECRYPTA
3
USB drivers. Make
sure the selection Search removable media if you are installing
drivers from the CD or write the direct path to a known location
for drivers using the ‘Browse’ window.
Click on Next.
Windows will then display a list of components useful to USB
installation of DECRYPTA
3
. Fig. 3 shows a warning
from Microsoft. You need to click on Continue Anyway to
finish installation of USB components of
DECRYPTA
3
.
Fig .4 will be displayed to confirm the correct installation of
USB components for DECRYPTA
3
. If an error
message is displayed contact MCDI support at
[e-mail] or [e-mail]
Fig. 1
Fig. 2
Fig.3
Fig. 4