User manual

DESCRIPTION Page 20 | 41
Operating guide for Alarm Receiver DECRYPTA
3
MCDI Security Products Inc.. Internet: mcdi.com
7055 Jean-Bourdon Avenue, Montreal, QC, Canada H4K 1G7 Telephone: [phone] Fax: [phone]
IDLE MODE. BROWSING RECEIVED EVENTS
Idle Mode default display
When not in configuration nor receiving signals, DECRYPTA
3
displays date on first line and time on second line. Press or to
browse events in the buffer.
Idle Mode Display options
• To permanently display Last Event received, set “Display Event”
(see above) to Yes.
• To change the format in which the date is displayed, see the “Date
Format” setting above.
Locking / Unlocking Settings
To lock the settings, press simultaneously and , then and
. You will see a lock symbol in the upper left corner of the screen.
Repeat the same procedure to unlock the settings.
• Locking the settings makes them read-only to protect from
accidental changes. Settings can still be examined, but not
modified.
• Reset is unavailable in this mode.
• When leaving the configuration mode by pressing at any
time, no confirmation will be asked, and no changes saved.
TYPICAL DISPLAYS–INCOMING SIGNALS
4X2, CALLER ID NATIVE FORMAT
LINE 1: TIME AND DATE
LINE 2: RECEIVER AND LINE NUMBER;
SIGNAL FROM PANEL
LINE 3: CALLER ID INFORMATION
LINE 4 RAW DATA
CONTACT ID, CALLER ID, NATIVE FORMAT
LINE 1: TIME AND DATE
LINE 2: RECEIVER AND LINE NUMBER;
SIGNAL FROM PANEL
LINE 3: CALLER ID INFORMATION
LINE 4 RAW DATA
SIA, CALLER ID, NATIVE FORMAT
LINE 1: TIME AND DATE
LINE 2: RECEIVER AND LINE NUMBER;
SIGNAL FROM PANEL
LINE 3: CALLER ID INFORMATION
LINE 4 RAW DATA
...... 00/12/07 ......
...... 00:12:04 ......
15:30:27__12/07/00
Rec: 1 Line: 2
CID: {4811067}
12 6161 F6
15:30:38__12/07/00
Rec: 1 Line: 2
CID: {4811067}
12 6262 E121 01 000
15:30:47__12/07/00
Rec: 1 Line: 2
CID: {4811067}
12 [#6363INHA000]