User manual

DESCRIPTION Page 16 | 41
Operating guide for Alarm Receiver DECRYPTA
3
MCDI Security Products Inc.. Internet: mcdi.com
7055 Jean-Bourdon Avenue, Montreal, QC, Canada H4K 1G7 Telephone: [phone] Fax: [phone]
Configuration by front panel commands and displays
General Configuration Procedure from the unit’s configuration menu
Start up display
Display on power-up. V.1.2.4 is the firmware version in this case
Configuration menu navigation. Modes
To enter configuration mode, press
and simultaneously. In
the configuration mode there are two modes: viewing mode and
editing mode. In viewing mode parameters can only be viewed (not
modified) by navigating using and buttons, to go to the
previous/next parameter respectively.
Regular parameters
In order to change a regular parameter, enter the editing mode by
pressing . You will see a black triangle appear to the right of the
setting symbolizing the editing mode. Press and buttons to
change the current setting of the parameter. To go back to the view
mode, press or .
Parameters in a submenu
Some parameters are organized in a submenu. When “Edit>>” is
displayed, this means that there is a submenu. Press to enter the
submenu. Pressing simultaneously and or and in a
submenu allows to select a particular submenu element to be edited.
Press and to modify the current element’s setting. Press
to leave the submenu and go back.
Saving changes and exiting from configuration mode
Press to leave the configuration mode. (Note that you can do it
only in the viewing mode, NOT in the parameter editing mode.) Unless
locked (see Locking Settings below), you will be prompted if the new
configuration should be saved. Press for “Yes”, and for “No”.
If the new configuration is to be saved, “Saving configuration”
message will appear.
List of parameters
NOTE: Make sure you read the above section explaining how
to navigate around the configuration menu.
Choice of language
Select from English, Spanish (español), French (français) Portuguese
(português) or German (deutsch)
DECRYPTA
Alarm Receiver
Version 1.3.3.
MCDI SP Inc.
Configuration Mode
:::::::::::::::::::::::::::::
(SETTINGS)
Choice Option
……………………………………………………………………………………
Enhanced mode Yes
(SETTINGS)
Choice Option
……………………………………………………………………………………Rec
eiver ID Edit>>
Yes
Save configuration?
No
Saving Configuration
                            
SETTINGS)
Choice Option
____________________________
Language English