User manual

DESCRIPTION Page 13 | 41
Operating guide for Alarm Receiver DECRYPTA
3
MCDI Security Products Inc.. Internet: mcdi.com
7055 Jean-Bourdon Avenue, Montreal, QC, Canada H4K 1G7 Telephone: [phone] Fax: [phone]
Send year Yes = Date including the year No = Date with no year (default)
Yes, tells DECRYPTA
3
to add the Year in date format: HH:mm _ _ MM/DD[/YY] ...
No, by default, tells DECRYPTA
3
to use date and time format: MM/DD.
Display Last Event Display setting allowing to always display last Event received instead of default display Date and
Time
Yes = Enable keeping Last Event permanently displayed; No = Revert to Default display.
ACK delay Wait time in seconds for ACK reception before resend. (Surgard/Native mode only)
Handshake order selection
Options
1400hz / VFSK 2300hz ROBOFON
SIA / CFSK STRATEL
DUAL 1400hz / 2300hz TELIM Selection inserts
1]400Hz 5) On Hook
2)[ SIA ] 6) On Hook
3) Cont ID 7) On Hook
4) 2300Hz 8) On Hook
In each Selections field insert option needed.
Transmission rate serial communication
1200 bps, no parity, 8 bits, I stop bit
Transmission rate USB communication
1200 bps, no parity, 8 bits, I stop bit
Connecting DECRYPTA
3
to PCs.
Typical scenarios are:
No connection to PC:
DECRYPTA
3
can be used in a stand-alone way, without PC. All configuration parameters can be
accessed from the internal configuration menu.
Using one connection (USB or Serial)
- DECRYPTA
3
connected by USB port only
USB
Decrypta
3
USB
WSReceiver
application
COM7: Virtual COM
port
ACK