User manual

DESCRIPTION Page 9 | 41
Operating guide for Alarm Receiver DECRYPTA
3
MCDI Security Products Inc.. Internet: mcdi.com
7055 Jean-Bourdon Avenue, Montreal, QC, Canada H4K 1G7 Telephone: [phone] Fax: [phone]
Receiver configuration
When a particular device is selected and its configuration screen is shown (see section “Configuration screens”), the following
actions are available:
Submit configuration
Press on the “Submit” button or, equivalently, select File Submit to send the configuration to the receiver, and close the
configuration screen.
NOTE: When the configuration is submitted the receiver is set to
the system time displayed in the “Synchronization” section:
Discard configuration
Press on the “Discard” button or, equivalently, select File Discard to discard any changes made and close the configuration
screen.
Save configuration
To save the current configuration to a file, select File Save.
Open a saved configuration
To load the configuration from a file, select File Open.
NOTE: File extensions are different for different receiver types. You will not be able, for example, to load an Exprecium I
configuration file (*.exp) while configuring an Exprecium II (*.expdec2).
Load Presets
For some receivers, there are preset configurations stored in the “presets” subdirectory of the Axe Configurator directory. You
will see the available presets under File Presets.
Configuration screens
Serial/USB DECRYPTA
3
Axe configurator recognizes
Decrypta 3 connected on USB port
of PC. Some options specific to
Decrypta 2 will be showned in this
window when Axe recognizes a
Decrypta 2 unit. Axe will also render
more information from USB
connection, namely receiver name,
firmware version installed in receiver
and serial number of unit. USB port
and COM port redirection (virtual
serial port redirection) are indicated
in the Device drop down menu.