User manual

Hardware View

2-15

Monitoring and Managing the Switch

Figure 2-5 Configure Date and Time Periodic Synchronization Dialog Box

2. Perform one of the following steps:

• To immediately synchronize the switch date and time with the

EFC Server, be sure the Periodic Date/Time Synchronization option

is enabled and then click Sync Now.

NOTE: If you enable the Periodic Date/Time Synchronization feature and

click Activate, the time will synchronize at the next update period.

To set the switch with a specific date and time, make sure that the

Periodic Date/Time Synchronization field is not selected. Refer to

Figure 2-6. Enter the date and time and then click Activate.

Figure 2-6 Configure Date and Time Manually

NOTE: Use the range of 0 to 23 for hours. Use the range of 0 to 59 for minutes

and seconds.