User manual

1
1-40
McDATA Sphereon™ 4500 Fabric Switch Product Manager User Manual
Product Manager Overview
Enabling QuikSync 1. Click the Windows Start button and select Programs, then Iomega
QuikSync and choose QuikSync.
The Iomega QuikSync dialog box displays.
Figure 1-12 Iomega QuikSync Dialog Box
2. Click On to enable QuikSync.
3. Click OK.
QuikSync Settings Do not change the default settings for automatic backup of the
EfcData directory. If you feel that QuikSync is not functioning
properly, check the settings using the following steps:
1. Open the QuikSync dialog box using one of these steps:
• Click the Windows Start button and select Programs, then
Iomega QuikSync and choose QuikSync.
• Double-click the QuikSync icon on the Windows system bar in
the lower right corner of the Windows desktop.
• Right-click on the QuikSync icon and select Settings from the
menu.
2. Verify that the dialog box is configured exactly as it displays in
Figure 1-12.