User manual

1-16

McDATA Sphereon™ 4500 Fabric Switch Product Manager User Manual

Product Manager Overview

FRU

Click a power supply module/fan in the Hardware View only and

select FRU from the Product menu to display the FRU Properties

menu option. These displays the properties dialog box for the

FRU. The FRU Properties dialog box can also be displayed when

you double-click the FRU in the Hardware View. For details on

these options refer to Displaying FRU Information on page 2-7.

Clear System Error Light

Select this to turn off the amber system error LED, located below

the green/blue power LED on the switch front bezel.

Enable Unit Beaconing

Click the check box to toggle unit beaconing on or off. When the

check box has a check mark, unit beaconing is on, and the amber

system error light on the switch front bezel blinks to help users

locate the actual unit in an equipment room. When you click the

check box to remove the check mark, unit beaconing is disabled

and the amber LED goes out. You can only enable beaconing if

there are no system errors (the system error light is off).

Properties

Click to display the Switch Properties dialog box. This dialog box

contains the switch name, description, location, and contact

person configured through the Configure Identification dialog box.

Also included is other product information as detailed in Switch

Properties. You can also display this dialog box by

double-clicking an area on the illustration in the Hardware View,

away from a hardware component.

Select this option to close the Product Manager window.

Configure Menu

Click on the Configure menu on the menu bar to display a menu that

lists the following options. For detailed information on using these

options, refer to Chapter 3, Configuring the Switch.

Identification

Select this option to display the Configure Identification dialog box.

Enter the following information in this dialog box: