User manual

1
Using the Product Manager
1-15
Product Manager Overview
NOTE: The EFC Manager window is still available as a separate window.
You can drag the Product Manager window away from the EFC Manager
window and view both windows on your PC desktop or minimize one or
both of them to icons if desired. You can have a maximum of four Product
Manager windows open concurrently.
Window Layout and
Function
The main Product Manager window is divided into four main areas
as shown in Figure 1-5 on page 1-14: menu bar, view tabs, view panel,
and status bar. Use features in these panels to configure switch
operation, monitor performance, and access maintenance features.
Menu Bar The menu bar on the Product Manager window displays the
following menus:
•Product
• Configure
•Logs
• Maintenance
•Help
Click one of the tabs to display a list of menu options. Click an option
to open a dialog box that allows you to perform configuration and
maintenance tasks and view logs. If a menu option contains a check
box, click in the box to add a check mark and enable a function. Click
a check box containing a check mark to remove the check mark and
disable the function.
Product Menu
Select one of the following options from the Product menu.
Port
This provides a secondary port menu only when the Hardware
View, Port List View, or Performance View displays in the view
panel. To use this menu for a specific port, click a port in the
Hardware View, a port’s row in the Port List View, or a port’s bar
graph in the Performance View. The menu contains options which
are identical to those that display when you right-click the port,
port row, or port bar graph in those views. For detail on these
options refer to Port Menu on page 2-17.