User manual

A
A-32
McDATA Sphereon™ 4500 Fabric Switch Product Manager User Manual
Product Manager Messages
Message The firmware version already exists.
Description Firmware version already exists in the database.
Action N/A. An informational message.
Message The following parameters cannot be disabled while Enterprise
Fabric Mode is active: Insistent Domain ID, Rerouting Delay,
Domain RSCN’s.
Description User attempted to disable these parameters in the Configure Switch
Parameters dialog box while Enterprise Fabric Mode is enabled.
Action Disable Enterprise Fabric Mode through the Enterprise Fabric Mode
dialog box in the EFC Manager, then disable the parameters.
Message The IPL configuration cannot be deleted.
Description Deletion of the IPL address configuration was attempted and was not
allowed.
Action Cancel the operation.
Message The link to the director is not available.
Description The link from the EFC Server to the director is not available.
Action Check Ethernet connection.
Message The maximum number of address configurations has been reached.
Description The maximum number of saved address configurations has been
reached.
Action Delete configurations no longer needed to allow new configuration to
be saved.